Chase Diamond

Tools International

Ltd

Vee Groove Tool
Tool Type
Vee Groove Tool
Form
Insert or Solid Shank
Shank
Specified
Insert Type
Specified (731-E, 741-E, 751-E, 761-E
Diamond Material
Natural or Synthetic Diamond
Tool Geometry
Width
0.45-4.00 mm
Protrusion
0.5 mm to 1.5 mm (Solid Shank) 0.5mm to 4.0 mm (Insert)
Clearance
0 o to 2 o (Dependant on width)
Side Clearance Angle
1 o to 2 o
Front Primary Clearance Angle
1 o to 3 o
Front Secondary Clearance Angle
Up to 12 o
Top Rake Angle
0 o to -5 o
Tip Form (Radius)
0.0254 mm to 0.252 mm in increments of 0.0254 mm
Tip Form (Flat)
0.0254 mm to WIDTH
Tip Included Angle (Angle 1)
From 20 o
Tip Angle 2
Specified
Tip Angle 3
Specified
Hand
Left or Right
Chip Free Magnification
800x
Download RFQ sheet for Vee Groove Tool (MS Word)
Copyright Chase Diamond Tools International Ltd.
Copyright Chase Diamond Tools International Ltd.

Chase Diamond

Tools International

Ltd

Vee Groove Tool
Tool Type
Vee Groove Tool
Form
Insert or Solid Shank
Shank
Specified
Insert Type
Specified (731-E, 741-E, 751-E, 761-E
Diamond Material
Natural or Synthetic Diamond
Tool Geometry
Width
0.45-4.00 mm
Protrusion
0.5 mm to 1.5 mm (Solid Shank) 0.5mm to 4.0 mm (Insert)
Clearance
0 o to 2 o (Dependant on width)
Side Clearance Angle
1 o to 2 o
Front Primary Clearance Angle
1 o to 3 o
Front Secondary Clearance Angle
Up to 12 o
Top Rake Angle
0 o to -5 o
Tip Form (Radius)
0.0254 mm to 0.252 mm in increments of 0.0254 mm
Tip Form (Flat)
0.0254 mm to WIDTH
Tip Included Angle (Angle 1)
From 20 o
Tip Angle 2
Specified
Tip Angle 3
Specified
Hand
Left or Right
Chip Free Magnification
800x
Download RFQ sheet for Vee Groove Tool (MS Word)